PVC Electrical Tape

Tensile Strength: 20 N/cm-24 N/cm
Elongation: 130%-150%
Adhesion to steel: 1.8 N/cm
Send Inquiry
Description

Products Description

 

PVC electrical tape is a tape made of polyvinyl chloride film (PVC film) coated with a layer of rubber pressure-sensitive adhesive. This material has high mechanical strength and good adhesion, and is suitable for insulating and repairing wire joints. PVC electrical tape is widely used for electrical insulation and protection of wires and cables, and is one of the materials commonly used by electricians. It needs to be stored in a cool and dry place, avoiding direct sunlight and high temperature.

 

Product Parameter

 

Adhesive Rubber
Total Thickness 0.13mm-0.15mm
Width 19mm-1250mm
Tensile Strength 20N/cm-24 N/cm
Elongation 130%-150%
Adhesion to steel 1.8N/cm
Temperature Rating 80ºC (176ºF)
Voltage Rating 600V
Colors Red, Black,Green,Yellow,White

 

strict quality control

product-750-783
product-750-770

Usage

Choosing the right electrical tape

There are many types of electrical tapes, which are generally divided into two types: PVC tape and rubber tape.PVC tape is mainly used in indoor environments, and is generally used for electrical insulation and marking of low-voltage equipment. This tape is soft and easy to tear by hand and is easy to install.

Wrapping insulation correctly

When using electrical tape, it is important to wrap the insulation correctly to ensure that the metal parts on the outside of wires and electrical equipment are completely and tightly wrapped. It is also important to pay attention to the length and number of sections covered by the tape to ensure the thickness and uniformity of the insulation.

Tape should be stored correctly

The insulating ability of electrical tape is highly dependent on the adhesive properties of its surface. If the surface of the tape becomes wet or contaminated, it will reduce its insulating ability and may even lead to electrical accidents. Therefore, electrical tapes should be kept dry and clean. When storing it, avoid direct sunlight. You need to place it in a dry and ventilated place to prevent the adhesion of the tape from decreasing.

Precautions

 

1. The use of electrical tape should follow the relevant national and industry standards to ensure that the performance and quality of the tape meets the standard requirements.

2. When using electrical tape, attention should be paid to the tape tension and wrapping angle to avoid wrinkles as much as possible.

3. The colour of the electrical tape can be opposite to the colour of the electrical equipment itself, so that it is easy to find out the position of the package quickly when repairing.

4. When using electrical tape, you should avoid leaving gaps in the tape to prevent electrical accidents.

5. If the tape breaks or falls off during use, it should be replaced in time.

 

Hot Tags: pvc electrical tape, China pvc electrical tape manufacturers, suppliers, factory, Smooth tear PVC tape, Scrubber Floor Pad, Double Sided Cleaning Sponge, Biodegradable Scouring Sponge, Cable Assembly Eco friendly PVC Tape, Self adhesive Floor marking tape