Black Electrical Tape

Black Electrical Tape

Width : 19mm-1250mm
Tensile Strength : 20N/cm-24 N/cm
Elongation : 130%-150%
Send Inquiry
Description

Products Description

 

Black electrical tape is a type of tape designed for use by electricians to prevent leakage and provide electrical insulation protection. It consists of a base tape and a pressure-sensitive adhesive layer. The base tape is usually made of cotton, synthetic fibre fabric or plastic film. The adhesive layer is made of rubber plus adhesion-enhancing resins and other matching agents, and has excellent adhesive and insulating properties. Black electrical tape is an indispensable insulating material in electrical engineering, home maintenance and industry, offering safety and practicality. In addition, it can also be used for fixing and binding.

 

Contact now

 

Product Parameter

 

Adhesive Rubber
Total Thickness 0.13mm-0.15mm
Width 19mm-1250mm
Tensile Strength 20N/cm-24 N/cm
Elongation 130%-150%
Adhesion to steel 1.8N/cm
Temperature Rating 80ºC (176ºF)
Voltage Rating 600V
Colors Red, Black,Green,Yellow,White

 

PVC electrical tape

 

PVC electrical flame retardant tape is an essential material in the field of modern electrician. It has excellent insulation voltage resistance, flame retardant and weather resistance properties. This kind of tape is not only suitable for wire winding, but also can be used for insulation and fixing of transformers, motors, capacitors, voltage regulators and other electrical and electronic parts.
In the industrial field, it can also meet the needs of bundling, fixing, lapping, repairing, sealing and protecting, etc. PVC electrical flame retardant tape is rich in colours, not only limited to the traditional black, but also red, yellow, blue, white, green and other choices, adding a variety of choices for the electrician's work.

 

strict quality control

product-750-750
product-750-770

FAQ

Q: What is the rule for electrical tape?

A: Proper application of electrical tape is to half-lap, as shown in the picture, which results in a double layer of tape. The rule of thumb is to do a minimum of two half-lapped layers or one and a half times the thickness of the insulation of the wire that you are wrapping, whichever is greater.

Q: Is electrical tape necessary?

A: As long as the twist-on wire connectors (colloquially known as "wire nuts", though that's a trademark) were the right size, attached firmly, and left no un-insulated wire exposed, electrical tape over them is unnecessary (and I believe is not recommended).

Q: Is Electric tape waterproof?

A: Although very stretchy and elastic, electrical tape is not waterproof. Because this adhesive would likely lose its properties when wet, waterproof electrical tape is simply not practical nor possible. Instead, most electrical tapes have a specific weather and water resistance level.

Hot Tags: black electrical tape, China black electrical tape manufacturers, suppliers, factory, Melamine Sponge Pad, Wall or Ceilling Cleaner, Soft Cellulose Sponge Cloth, Tearable PVC tape, Dirt removing Magic Cleaning Foam, Compostable Compressed Cellulose Sponge